Manually configure IPv4 TCP/IP parameters (LCD control panel)
1.
On the control panel, press the
OK
button.
2.
Use the arrow buttons to select the Network Setup option, and then press the
OK
button.
3.
Use the arrow buttons to select the TCP/IP configuration option, and then press the
OK
button.
4.
Use the arrow buttons to select the Manual option, and then press the
OK
button.
5.
Use the alphanumeric buttons to type the IP address, and then press the
OK
button.
6.
If the IP address is incorrect, use the arrow buttons to select the No option, and then press the
OK
button. Repeat step 5 with the correct IP address, and then repeat step 5 for the subnet mask and
default gateway settings.